How to Wash a Ceramic Coated Car

There are a lot of misconceptions about how to wash a ceramic coated car. Ceramic coatings are becoming more and more popular because they offer superior protection against scratches and swirls.

Many people think that you can’t use a pressure washer or that you have to be extremely careful when washing your car. However, washing your ceramic coated car is easy and safe with the right products and techniques.

How to Wash a Ceramic Coated Car: Step-by-Step Process

Ceramic coating is a popular way to protect your car’s paint and keep it looking shiny and new. But how do you wash a ceramic coated car without damaging the coating?

Here’s a step-by-step guide on how to wash your ceramic coated car the right way.

Step one: Mix up a bucket of soapy water using a mild soap or car shampoo. Do not use dish soap, laundry detergent, or any other harsh chemicals, as they can strip away the ceramic coating.

Step two: Get a soft sponge or wash the mitt and soak it in soapy water. Gently scrub the surface of your car, starting with the top and working your way down. Be sure to rinse off the soap after each section.

Step three: Dry your car with a clean microfiber towel or chamois. Do not let the car air dry as this can cause water spots.

Eventually, you want to make sure you’re washing your ceramic coated car every two weeks or so. This will help keep the coating in good condition and prevent dirt and grime.

Best Tips to Maintain a Ceramic-Coated Vehicle

1. Clean the Vehicle Frequently

Ceramic-coated vehicles need to be cleaned more frequently than traditional paint finishes. The reason is that the coating creates a barrier between the paint and contaminants, which means that any dirt, grime, or other debris that gets on the vehicle will cause the paint to become dull and damaged.

To keep your ceramic-coated vehicle looking its best, it’s important to wash it regularly. Ideally, you should wash your car once a week; however, you may need to wash it more often if you live in high pollution or with lots of road salt.

2. Use Mild Soap

When washing a ceramic-coated vehicle, always use a mild soap and avoid using any harsh chemicals or abrasive cleaners. You should also avoid using a pressure washer, which can damage the coating. Instead, use a soft cloth or sponge to wash the vehicle gently by hand.

Once you’ve washed the vehicle, rinse it thoroughly with clean water to remove any soap residue. Then, dry the vehicle with a soft microfiber towel to prevent water spots from forming.

ALSO READ: How to Remove Paint from Ceramic

3. Avoid Automated Car Washes

While automated car washes may be convenient, they can damage your ceramic coating. The high-pressure water and harsh chemicals can strip away the protective barrier, leaving your paint vulnerable to scratches, chips, and other forms of damage.

If you must use an automated car wash, choose one that doesn’t use any brushes or other abrasive materials. Additionally, make sure the car wash is equipped with soft cloths or sponges rather than hard bristles.

4. Use Grit Guards Where Possible

Image Credit: ChipsAway

If you wash your vehicle in an area where there’s a lot of dirt and debris, it’s important to use grit guards. Grit guards are designed to catch any dirt or sand on your sponge or wash mitt. Therefore, this helps to prevent scratches.

To use grit guards, place them in the bottom of your bucket before adding water and soap. Then, when you’re finished washing the vehicle, remove the grit guards and empty them before storing them away.

5. Apply Maintenance Spray

Another great tip for maintaining a ceramic-coated vehicle is applying a maintenance spray. After you’ve washed and dried your vehicle, applying a maintenance spray is a good idea. This will help keep the ceramic coating in good condition and prevent it from becoming dull.

To apply the spray, mist it onto the vehicle’s surface and then wipe it off with a clean microfiber towel. Avoid getting any on the windows or glass, as this can cause streaking.

6. Consider Annual Inspections

It is also important to have your ceramic-coated vehicle inspected annually. This will help ensure that the coating is still in good condition and that there are no areas that need to be repaired or replaced.

A professional will clean the vehicle and then inspect it for any damage during the inspection. If they find any problems, they’ll make the necessary repairs or replacements.

The Bottom Line

Ceramic coating a car is an investment. You paid good money for it, so you want to make sure you protect that investment by washing your car the right way. The wrong way can cause problems, from water spots to etching in the clear coat. Therefore, try to implement some of the maintenance tips we’ve advised in this post and keep doing more research to find other suitable ways.

error: Content is protected !!